This paper presents experiences and results from large scale and systematic use of the CDIO Syllabus for developing program goals and formulating learning outcomes at Linköping University (LiU), Sweden, and Technical University of Denmark (DTU). The approaches are based on the use of tools for program design such as ITU-matrices and skill progression matrices. During the process local adaptations of the Syllabus have been made in order to meet regulations by authorities in higher education as well as to cover programs in related areas as natural sciences. The experiences are that the CDIO Syllabus is a very useful tool in this process and that the way of organizing the management of the education programs is important for success as well as support from students, faculty members and stakeholders.
Pages:
14
Affiliations:
Linköping University, Linköping, Sweden
Technical University of Denmark, Denmark
Keywords:
program goals
Curriculum Design
learning outcomes
ITU-matrix
skill progression matrix
Year:
2009
Reference:
The CDIO Standards. http://www.cdio.org.:
E. F. Crawley, J. Malmqvist, S. Östlund, and D. Brodeur, Rethinking Engineering Education. The CDIO Approach. Springer Verlag, 2007. :
J. Bankel, K.-F. Berggren, E. Crawley, M. Engström, K. El Gaidi, S. Östlund, D. Soderholm, I. Wiklund, Benchmarking Engineering Curricula with the CDIO Syllabus. The International Journal of Engineering Education, Vol. 21, No. 1, 2005. Can be downloaded from http://www.cdio.org.:
J. Bankel, K.-F. Berggren, K. Blom, E. F. Crawley, S. Östlund, I. Wiklund, The CDIO Syllabus: A comparative study of expected student proficiency. The European Journal of Engineering Education, Vol. 28, No. 3, 2003. Can be downloaded from http://www.cdio.org.:
S. Gunnarsson, I. Wiklund, T. Svensson, A.-L. Kindgren, and S. Granath, Large scale use of the CDIO Syllabus in formulation of program and course goals. 3rd International CDIO Conference, Cambridge, Mass., USA, 2007. Can be downloaded from http://www.cdio.org.:
J. Malmqvist, S. Östlund, and K. Edström, Integrated Program Descriptions – A Tool for Communicating Goals and Design of CDIO Programs, 2nd International CDIO Conference, Linköping, Sweden, 2006. Can be downloaded from http://www.cdio.org.:
J. Sparsö, P. Klit, Michael May, G. Mohr, and M.E. Vigild. Towards CDIO-based B. eng studies at the Technical University of Denmark. 3rd International CDIO Conference, Cambridge, Mass., USA, 2007. Can be downloaded from http://www.cdio.org.:
The Bologna Process. Towards the European Higher Education Area. http://ec.europa.eu/education/policies/educ/bologna/bologna_en.html :
The CDIO Syllabus. http://www.cdio.org.:
UFB 3 2006/07 Utbildningsväsendets författningsböcker. Universitet och högskolor. Norstedts Juridik, 2006. :
S. Gunnarsson, E. Lindblad, and I. Wiklund, Using an alumni survey as a tool for program evaluation, 1st Annual CDIO Conference, Kingston, Ontario, Canada, 2005. :
K.-F. Berggren, T. Svensson, S. Gunnarsson, and I. Wiklund, Development of the Applied Physics and Electrical Engineering (Y) Program at Linköping University through the participation in the CDIO Initiative. 8th UICEE Annual Conference on Engineering Education, Kingston, Jamaica, 2005. :
K.-F. Berggren, S. Gunnarsson, T. Svensson, and I. Wiklund, Redesign of the Applied Physics and Electrical Engineering (Y) Program at Linköping University according to CDIO. 33rd SEFI Conference, Ankara, Turkey, 2005. :
P. Tengvall, A. Kindgren, K. Järrendahl, and K. Uvdal, CDIO-Based Courses in Engineering Biology at LiTH, 1st Annual CDIO Conference, Kingston, Ontario, Canada, 2005.:
K. Bjerner and S. Granath, Development of Three Bachelor’s Programs at Linköping University according to CDIO, 1st Annual CDIO Conference, Kingston, Ontario, Canada, 2005. :
EUR-ACE Framework for the Accreditation of Engineering Programmes, 2005.:
CDIO på DTU’s diplomingeniøruddannelser – Handlingsplan 2007-2008. DTU 2007.:
J. Malmqvist, K. Edström, S. Gunnarsson, and S. Östlund. The application of CDIO Standards in the evaluation of Swedish engineering degree programmes. World Transactions on Engineering and Technology Education, Vol 5, 2006. :
L. Woollacott, The goals of engineering education: A rationale for a universal document based on the CDIO Syllabus and the taxonomy of engineering competences. 3rd International CDIO Conference, Cambridge, Mass., USA, 2007. Can be downloaded from http://www.cdio.org.:
on December 9, 2018 - 12:18 Tyrone Machado
Conceive
Design
Implement
Operate
